Warp Gasification
team@univastum.com
Knowledge Base
Chief Technology Officer
Peter Kalenuk
Industrial Waste-to-Steam
Integrated Waste-to-Steam facility for industrial client
Spain
Municipal Waste-to-Electricity
Modular Waste-to-Energy facility for municipal solid waste
Romania
investors@univastum.com
Chief Investment Officer
Eben Klynsmith
Our Approach
Work With Us
Insights & News
Press Kit
mt@univastum.com
Chief Marketing & Communications Officer
Matthew Tucker

How Is Waste Converted into Usable Syngas?

Municipal solid waste, industrial waste and biomass contain chemical energy that can be converted into useful gaseous fuel.

Developed by Univastum, WARP gasification transforms prepared waste into synthesis gas (syngas) containing combustible components, primarily hydrogen (H₂), carbon monoxide (CO) and methane (CH₄).
Unlike conventional incineration, which recovers energy primarily as heat, WARP gasification produces a combustible syngas suitable for industrial heating, steam and electricity generation, and partial natural gas substitution.

Where Can Waste-Derived Syngas Be Used?

Conditioned syngas can supply industrial boilers, burners, hot gas generators and compatible power generation equipment.

It can be used for process heating, drying, steam production and electricity generation. Depending on equipment specifications, syngas can also be blended with natural gas, allowing industrial facilities to reduce conventional fuel consumption while retaining much of their existing energy infrastructure.

How Does Waste Become Combustible Syngas?

The process begins with feedstock preparation. Non-combustible materials are removed, and excessive moisture is reduced using heat recovered from syngas cooling.

Inside the reactor used for WARP gasification, prepared fuel undergoes heating, pyrolysis, partial oxidation and gasification.

The key principle is controlled oxygen deficiency. Rather than completely converting carbon into non-combustible carbon dioxide, gasification produces combustible carbon monoxide.

Complete combustion: C + O₂ → CO₂
Partial oxidation: C + ½O₂ → CO

Consequently, part of the original waste's chemical energy remains stored in the produced gas.

Why Is Steam Used in WARP Gasification?

Steam is introduced into the gasification chamber to support high-temperature reactions and influence syngas composition.

Two important reactions are:

Water-gas reaction:
C + H₂O → CO + H₂

Water-gas shift reaction:
CO + H₂O ⇌ CO₂ + H₂

These reactions can increase hydrogen content and contribute to carbon conversion under suitable operating conditions. Steam injection also helps regulate reactor temperature.

Why Does High Temperature Matter?

In WARP gasification, syngas is extracted at approximately 900–1000°C.

At these temperatures, heavy hydrocarbons and tar compounds increasingly undergo thermal cracking and reforming into lighter gaseous components.

This reduces condensable tar content and helps preserve combustible material in the gas phase. Under suitable operating conditions, residual carbon in the mineral residue can be below 1% by mass, indicating extensive carbon conversion.

What Is the Heating Value of Syngas?

Syngas composition depends on feedstock characteristics and operating conditions.

Representative composition ranges for WARP gasification are:
* These indicative ranges do not represent one simultaneous gas composition.
For preliminary calculations, the lower heating value (LHV) of dry syngas is approximately 4.5–5.5 MJ/Nm³. Although lower than natural gas, this makes syngas a useful industrial fuel when suitable combustion equipment is provided.

Can Syngas Replace Natural Gas?

Yes. Conditioned syngas can partially replace natural gas in compatible industrial combustion systems.
It may be supplied to dedicated burners or blended with natural gas for use in existing equipment, subject to combustion compatibility and necessary modifications.

The achievable substitution ratio depends on gas composition, heating value, burner characteristics and process requirements.

How Is Gasification Different from Incineration?

Incineration converts waste directly into heat through complete combustion. WARP gasification instead produces a combustible gaseous fuel.

After appropriate conditioning, syngas can be supplied to industrial burners, boilers, hot gas generators and compatible power generation systems.

This provides greater flexibility in integrating waste-derived energy into industrial operations without necessarily replacing the entire existing energy infrastructure.

The Result

WARP gasification converts prepared waste into a usable gaseous fuel while recovering additional thermal energy from the process.

The practical advantage is flexibility: waste-derived syngas supports industrial heating, steam and electricity production, and partial natural gas substitution.

This connects waste management with industrial energy supply, reducing dependence on conventional fuels and creating additional value from waste.